Home Page E-mail
Material testing instrumentation
Industrial refrigeration
Environmental & weathering
simulating apparatus

Profile

Where we
are

Where
we operate

Products

Fairs

Responsability

Support

Guarantees

References

Contact
 
 

SSC
CHAMBERS FOR SALT FOG

CHAMBERS FOR SALT FOG
 
Zoom
 
 
 
 
 
Our Salt fog Chambers are studied for the accomplishment of the existing normative for corrosion testing, in a controlled environment. With this generation of equipment it is possible to ascertain the consequences of organic and inorganic treatments on metallic surfaces, and to value possible corrosive effects emerging under aggression.
The realisation of SSC Chambers is the result of a deep knowledge of the whole normative currently available regarding "accelerated corrosion".
These equipment are studied to perform continuous tests, cyclic, multistep, fully compatible with procedures: ASTM, DIN (SS, ASS, CASS), ISO, UNI (corrosion test underfilm: in bubbles and filiform), AFNOR, PROHESION, BS, GM, CCT, MIL, RENAULT, FIAT, VOLKSWAGEN, FORD, NISSAN, BMW, JIS…
INTERNAL AND EXTERNAL STRUCTURE :
Structures are built with inert material, without any metallic part which may interfere with the test (stainless steel, aluminium, brass) and assuring the conformity to national and international standards.
Thermostatic intercapedin ("Water- Jacket") with indirect heat and uniformity of temperature in the internal, with energy saving, in conformity with technical standard ASTM B 117.
Reinforced deposit for solution, with capacity of 50 litres, allowing a rehearsal autonomy for 5 days consecutive, (120 hours); auxiliary connections to tanks of bigger capacity.
The deposit is equipped with an automatic mixer, by means of which the operator can prepare the solution inside the deposit.
Humidification and heating of air by means of "Bubble Tower", with a regulating valve, manometer, spray nozzle to attain a higher precision of temperature and humidity inside the Chamber.
The pluviometers gather the fallen solution to direct it into two external collectors, allowing a continuous measurement without need of opening the cover that would interrupt the test.
Compensating outlet for the condensation exhsaust.
N° 2 Supporters for inert material, for samples hanging.
N° 4 Castors.
COVER :
Cover with small vane, anti-dropping, reinforced on side and with transparent window. Provided with automatic opening and safety system, avoiding overheating during the inspection inside the chamber and preventing any damage to the Bubble Tower and to the Chamber itself.
TEMPERATURE AND HUMIDITY REGULATION :
Programmer for cycles (99) with two steps (Fog/Dry), loop repetition (999), digital microprocessor and precision of 0,1°C, sensor PT 100 Ohm, DIN class A, autotuning PID for Bubble Tower.
Digital stop timer. The operator can program the rehearsal time, planning to stop the Chamber automatically.
Hours counter with battery back-up for the reading of the test duration.
TEMPERATURE RANGE :
from environment to +10°C until +50°C
Bubble Tower: from environment to +10°C until +55°C
Temperature uniformity: +/- 0,5°C
RELATIVE HUMIDITY RANGE :
until 98%
With nozzle spray and central tower, to allow a homogenous fog distribution.
Air inlet pressure 4 bar
Deionized water inlet 2/4 bar
Power supply: Volt 220/1/50 HZ +N+T
CODE
02720123
02720124
02720125
02720126
         
MODEL
SSC 600
SSC 1200
SSC 1600
SSC 2000
Capacity l
500
1011
1600
2000
External dimensions
Length
1700
2420
2330
2700
Width
1050
1150
1380
1380
Height
1300
1700
1860
1920
Internal dimensions
Length
830
1300
1600
2080
Width
650
1000
1000
1000
Height
750
600
900
900
N° atomising nozzles
1
1
1
2
Connection power in Kw
5
8
10
11
Working pressure in Kg/cmq
1
1
1
1
Water pressure
2/4 bar
2/4 bar
2/4 bar
2/4 bar
Air pressure
4 bar
4 bar
4 bar
4 bar
Environmental conditions
+17°C / +28°C
+17°C / +28°
+17°C / +28°C
+17°C / +28°C
Weight Kg
150
195
200
250
STANDARD ACCESSORIES
09927100   Acoustic alarms for lack of water
09927101   Acoustic alarms for overheating
09927102   Digital regulator for Bubble Tower temperature
09927103   Thermostatic system with Water Jacket
09927104   Electronic Programmer for dry / fog cycles (for tests UNI 9590 and Prohesion tests)
09927105   Digital regulator for vane temperature
09927106   Level indicator Bubble Tower
09927107   Salt Solution level indicator
09927108   Water Jacket level indicator
09927109   Manometer and indicating and regulating pressure of Bubble Tower; atomisation nozzle.
09927110   "Bypass facility" of compressed air / Bubble Tower (for tests with UNI9590 and prohesion tests
09927111   Electric device for cover opening
OPTIONAL ACCESSORIES
09927112   Graphic temperature recorder with microprocessor
09927113   Device for forced draining away of fog (before opening of the cover)
09927114   Additional samples holders
09927115   Thermostatic system with Water Jacket
09927116   RS 232 Interface
09927117   Passing hole
09921197   Remote software for Windows, allows acquisition, printing, exporting data
Characteristics and data can be modificated without forewarning.
C.T.I. s.r.l.
Climatic Technologies Industry
Back / Top

C.T.I. s.r.l. Via dell'Artigianato, 16 - 20812 LIMBIATE (MB) MILANO ITALY - Tel. +390296460000

- Privacy Policy -